Since we are not yet officially integrated with Vera, the Dome Leak Detector is recognized out of the box in Vera as a Motion Sensor (see figure 1.) To pair, click "Add a Device" in the Devices section, search for “Generic Z-Wave Devices” and label it to help tell it apart from actual Leak sensors. After it’s paired, it will appear as two separate devices in your dashboard (figure 1) - be sure to rename both to keep yourself organized. The "Motion Sensor" device/tile is the device that should be used for scenes!! You can use the Leak Detector's status as triggers in your scenes to receive notifications or do something else when a leak is detected (fig 2.) You can, for example, automatically close a valve if a leak is detected.
Fig 1 - How the Leak Detector appears in Vera when not tripped.
Fig 2 - How the Leak Sensor appears when configuring a scene in Vera to trigger when a leak is detected. Be sure to select the correct device, or else you will not see the correct options and it will not work!
Please sign in to leave a comment.