All features of Dome's On/Off Plug-In Switch are available within HomeSeer. Please make sure your Z-Wave plug-in is up to date before continuing (at least version 3.0.1.110). See Figure 1 for a screenshot of how the the Z-Wave log should appear after successful inclusion.
After successful inclusion, the On/Off Plug-In Switch can be turned on or off as actions in events. See Figure 2 to see how the On/Off Plug-In Switch and all associated virtual devices will appear in the home page.
In Figure 3, the On/Off Plug-In Switch is turned on as part of an event. This can, for example, turn on a lamp when motion is detected.
In Figure 4, an event will trigger when the On/Off Plug-In Switch is overloaded.
Finally in Figure 5, the event will trigger if the current exceeds 1 amp. Use this to trigger an event when the plugged in device is being used (for example, the TV, etc.)
Figure 1 - How the the Z-Wave log should appear after successful inclusion
Figure 2 - How the On/Off Plug-In Switch and all associated virtual devices will appear in the home page
Figure 3 - This event will turn on the On/Off Plug-In Switch
Figure 4 - This event is triggered when the On/Off Plug-In Switch is overloaded
Figure 5 - event will trigger if the current exceeds 1 amp. Use this to trigger an event when the plugged in device is being used (for example, the TV, etc.)
Comments
0 comments
Please sign in to leave a comment.