The Dome Door/Window Sensor Pro works with Wink, follow along to get started:
Initial Setup
Pairing
1. Open up your Wink app and select Add a Product
2. Select Browse All Brands then Z-Wave
3. Select Generic Z-Wave Sensor
4. Press Next on the following screens until you see the Connect Now page, but don't press the button just yet
5. Remove the cover of your Door Sensor Pro, if the LED is blinking red perform a factory reset and if it is alternating red/green press the tamper button quickly 3 times
6. When the LED is flashing yellow you're ready to continue
7. Press the tamper button on your Door Sensor Pro quickly 3 times, the LED should now be flashing red/green
8. In the Wink app press Connect Now, it may take longer to include than other devices because of the encryption setup, be patient
9. Choose a location for your sensor and press Next
10. You can rename your sensor by pressing Name Sensor, when you're finished press Done
11. Tap Get Started to finish setup
Interface
At this time the temperature sensor isn't accessible in Wink, but we're working with Wink to fully integrate the Door Sensor Pro. Once your Door Sensor Pro is installed you can access it from the Home Screen:
Status
1. In your Home Screen tap on Sensors to see a summary of your sensors
2. Tapping on Door Closed brings up the status of each individual door/window sensor in your system
Settings
1. In your Home Screen, tap on Sensors
2. Swipe over to the Settings page and select your Dome Door/Window Sensor
3. Here you can edit the name or view battery and connection status
Comments
0 comments
Please sign in to leave a comment.