The Dome Leak Sensor is fully integrated with Wink so setup couldn't be simpler, follow along to get started:
Initial Setup
Pairing
1. Open up your Wink app and select Add a Product
2. In the list of categories pick Sensors then choose Dome Leak Sensor
3. Follow the instructions in the app
Interface
Once your Leak Sensor is installed, you can access it from the Home Screen:
Status
1. In your Home Screen tap on Sensors to see a summary of your sensors
2. Tapping on Dry brings up the status of each individual leak sensor in your system
Settings
1. In your Home Screen tap on Sensors
2. Swipe over to the Settings page and select your Dome Leak Sensor
3. Here you can edit the name or view battery and connection status
If you want to automatically shut off your Water Main when leaks are detected, check out this article:
Shut Off Your Water Main When Leaks are Detected in Wink
If you want an audible alarm to sound as well, this article shows you how:
Trigger an Alarm When A Leak is Detected in Wink
If all you want is a notification when a leak is detected, this article is for you:
Get a Notification When A Leak is Detected in Wink
Comments
0 comments
Please sign in to leave a comment.