The Dome Water Main Shut-Off is recognized as a switch by Harmony with a Hub Extender and all of its features are available, so setting up and automating your valves is a snap. The following steps will get you started:
1. Under the Devices tab in your Harmony app tap Edit Devices, then + Device
2. Select ZIGBEE/Z-WAVE DEVICES and put your Water Main Shut-Off in pairing mode by pressing the button on the top quickly 3 times
3. Once the Shut-Off is found you can tap the pencil icon to rename it, then tap the X in the corner to go back
4. Tap Done on the bottom and your Water Main Shut-Off is ready to rock
Your Water Main Shut-Off will be listed under Plugs and can be toggled by tapping the icon next to its name.
If you want Harmony to close your water main valve when a leak is detected, check out this article:
Shut Off Your Water Main When Leaks are Detected in Harmony
Please sign in to leave a comment.