The Dome Water Main Shut-Off works with Iris. Follow along with the steps below to set up your device:
Initial Setup
Pairing
1. In your Iris App tap the + in the corner, then Device
2. When the Iris hub is in pairing mode tap the button on the Water Main Shut-Off quickly 3 times
3. The hub will beep and your app will let you know it has found a device, tap the arrow in the upper right hand corner to continue
4. Tap on the device to rename it
5. When you're done renaming your Water Main Shut-Off hit NEXT
6. Press NEXT on all of the following screens
7. Press DONE
8. Press REBUILD NOW, once it completes press DONE
Interface
1. To look at your Water Main Shut-Off open the menu and tap DEVICES
2. Select your Water Main Shut-Off
3. Here you can see if the Water Main Shut-Off is certified by Iris and open/close the valve
4. Tapping MORE in the upper right corner brings up the options
Comments
0 comments
Please sign in to leave a comment.