All features of Dome's Leak Sensor are available within HomeSeer. Please make sure your Z-Wave plug-in is up to date before continuing (at least version 3.0.1.110). See Figure 1 for a screenshot of how the the Z-Wave log should appear after successful inclusion - if you see any errors, see this article about including battery powered devices into HomeSeer.
After successful inclusion, the Notification status (whether or not water is present) can be used as an event trigger or condition. See Figure 2 to see how the Leak Sensor and all associated virtual devices will appear in the home page.
In Figure 3, an event is triggered when the Leak Sensor senses moisture. This can, for example, send a notification when a leak is detected.
In Figure 4, a Water Main Shut-Off is automatically closed when a leak is detected.
Figure 1 - How the the Z-Wave log should appear after successful inclusion
Figure 2 - How the Leak Sensor and all associated virtual devices will appear in the home page
Figure 3 - This event will trigger if water is detected (only if previously, there was no water)
Figure 4 - A Water Main Shut-Off is automatically closed when a leak is detected
Comments
0 comments
Please sign in to leave a comment.