If you have Dome’s On/Off Plug-In Switch and Motion Detector, Wink can automatically turn on a lamp connected to the On/Off Plug-In Switch if motion is detected. Follow the steps below to automatically illuminate your life with the On/Off Plug-In Switch. If you haven't set up your devices yet check out the following articles before you start automating:
Using your On/Off Plug-In Switch in Wink
Using your Motion Detector in Wink
1. At the top of your home screen select Robots and tap New Robot
2. Name your Robot (I named mine “Magic Lamp”) and choose Something to set a trigger
3. Select your Dome Motion Sensor
4. Set your event to trigger when the sensor Detects motion
5. Tap Make This Happen and select your Dome On/Off Switch from the list
6. Make sure it's set to turn On, hit Save, and tap Done in the corner
7. Your On/Off Plug-In Switch will now turn on when motion is detected
Comments
0 comments
Please sign in to leave a comment.