The Dome On/Off Plug-In Switch works with Iris. Follow along with the steps below to set up your device:
Initial Setup
Pairing
1. In your Iris App tap the + in the corner, then Device
2. When the Iris hub is in pairing mode tap the button on the On/Off Plug-In Switch quickly 3 times
3. The hub will beep and your app will let you know it has found a device, tap the arrow in the upper right hand corner to continue
4. Tap on the device to rename it
5. When you're done renaming your On/Off Plug-In Switch hit NEXT
6. Press NEXT on all of the following screens
7. Press DONE
8. Press REBUILD NOW, once it completes press DONE
Interface
1. To look at your On/Off Plug-In Switch open the menu and tap DEVICES
2. Select your On/Off Plug-In Switch
3. Here you can turn the On/Off Plug-In Switch ON and OFF with the slider and see how much power a plugged in device is using
4. Tapping MORE in the upper right corner brings up the options
Comments
0 comments
Please sign in to leave a comment.